22no. AROD Insulated Sectional Overhead Doors and 8no. Dock Levellers Manufactured and Supplied to the World's Leading Furniture Retailer

Armo (UK) are proud once again to be selected to manufacture and supply Dock Levellers to the World’s Largest Furniture Retailer.  On this occasion we have supplied 8no. Armo Swing Lip Dock Levellers, 22no. Insulated Overhead section doors and 24no. LED Traffic Lights

Full details on the products Armo supplied are below: -

22 no. Armo Insulated Sectional Overhead Doors

The AROD Insulated Sectional Overhead Door tracks are our galvanised steel ‘J’ type, which are designed to give free and easy running for bearing rollers. These tracks are mounted onto a heavy-duty galvanised jamb angle.  The perimeter of the doors is fully sealed, as well as the intermediate panel joints, providing most effective weather seal to the door.

All Armo products are supplied to the latest European standards as you would expect – the sectional door is no exception, built to BS EN13241 and installed and maintained by our own employed engineers you can rest assured that you have invested in a quality product.

8no. Armo Swing Lip Dock Levellers Model ARSL

Armo dock levellers are robust in design and construction; the platforms are made from 6/8 mm tear plate steel, supported by a minimum of 8 longitudinal beams to strengthen the deck but still allowing it to twist through its length to cater for vehicles that are out of level. The ARSL is in full compliance with BS EN 1398. 

Frame design Armo swing lip dock levellers are designed in 3 installation styles:

• Traditional pit mounting where the pit is bounded with previously cast-in pit edge angles and the dock leveller sits on a solid pit base, the dock leveller is welded in at the back and front.
• Suspended versions are available usually for new build projects or to replace existing suspended dock levellers. As their name suggests the dock leveller is suspended from its top edge allowing the underside of the pit to be clear for access by tail lifts; this enables the dock leveller clear access into the deck of the vehicle.
• Box style dock levellers are designed to provide quick and easy installation in existing buildings. To install a box leveller an oversize pit is required complete with a flat base, the box model leveller is positioned and fixed down and concrete poured around it. Once the electrics are connected the leveller is ready to go.

The ARSL is in full compliance with BS EN 1398. 

24no. ARTR LED Traffic Lights

The traffic lights were red over green LED lights, provided in fully sealed black moulded units, complete with small sun visors. These are interlocked to the loading bay, so the light shows green when the door is closed and red whenever the door is open.

For more information or a free site survey please do not hesitate to contact us.

Armo have been manufacturing high quality loading bay and lifting table solutions since 1972.