Complete loading bay supplied and installed for existing Scarborough customer
18/10/2021

We have been collaborated with our client since 2015. Following a consultation with our projects team, we collaborate with our client to manufacture and install a completely new loading bay for their site in Scarborough. Our client has a strong future in the artisan bakery sector, with over 20…Read More

We have been collaborated with our client since 2015. Following a consultation with our projects team, we collaborate with our client to manufacture and install a completely new loading bay for their site in Scarborough. Our client has a strong future in the artisan bakery sector, with over 20 years’ experience and ever-growing facilities in Sheerness, Scarborough, Dudley, Workington, and Bolton.

We welcomed the opportunity to quote for supply and installation for:

One ARSL Swing Lip Dock Leveller, which was a size of 2000mm width x 2500mm length and a minimum pit depth of 610mm. The operating parameters were 360mm above and 300mm below dock. The lip length was 400mm, complete with a 5° curvature for when loading above dock with a 6 tonne single axle load capacity in accordance with BS EN 1398.

One ARSR Retractable Dock Shelter supplied in an overall width of 3500mm, 3600mm height, with a projection of 600mm. The width of the front curtain was 650mm and the length 1200mm. Our heavy duty dock shelters are suitable for accommodating vehicles of varying heights, whilst at the same time providing an effective seal.

An ARRS Roller Shutter Door. This was in a size of opening width 3000mm, 3000mm opening height and headroom of 550mm. These doors are manufactured using traditional 75mm deep scrolled interlocking lath, the lath is end locked to prevent lateral movement and the curtain is supplied complete with a bottom ‘T’ bar.

A set of ARTR LED Traffic Lights for the loading bay. The traffic lights were red over green LED lights, provided in fully sealed black moulded units, complete with small sun visors. These are interlocked to the loading bay, so the light shows green when the door is closed and red whenever the door is open.

The Armo Loading Dock Buffers model ARDB were supplied in the basic specification of 250mm x 450mm x 100mm. Armo Dock Buffers are made from heavy duty solid rubber, fixed to a prime and painted solid steel backing plate using M24 fixings and the plate in turn is welded in position to provide a long lasting solid fixing.

Managing Director Darrell Hopwood, said of this project “We have done quite a few projects with David Wood Baking and was pleased to be appointed again for this project in Scarborough”

To download a specification sheet, please head to the specific product page and click the ‘download pdf’ button towards the bottom of the page. You can see Armo products in action and installed at our YouTube page.

Armo have been manufacturing high quality loading bay and lifting table solutions since 1972, for further technical or pricing information please contact us.

More information on Armo (UK) products can be found in our products section where you will find downloadable PDF's of our product range. View our Dock Levellers and Lifting Tables in action on our YouTube channel.