Due to the company’s expansion, Armo (UK) have installed two new loading bays, in their new Cold storage facility in Porthmadog.

The two new loading bays consisted of the following:

ARTL Telescopic Lip Dock Levellers, as the names suggests the dock leveller is suspended from its top edge allowing the underside of the pit to be clear for access by tail lifts. This gives clear access when docking the vehicles. This Model ARTL is in full Compliance with BS EN 1398.

Model ARCS Cushion Seals are also known as dock pads. Cushion seals are made using high density closed cell foam encased in heavy duty PVC and wear plates are added in addition to the front material to increase the durability of the seal.

When the vehicle reverses on to the cushion seal it compresses the foam as far as the dock buffers allow thus creating a seal between the vehicle and the building.

ARBD Wheel Alignment Guides are manufactured with soft radius bends and are supplied for installing centrally to the loading bay, circa 2000mm from the dock face. The reversing vehicle slots between the guides ensuring that the vehicle docks safely and centrally onto the loading bay.

ARTL LED Traffic Light are for the loading bay. The traffic lights were red over green LED lights, provided in fully sealed black moulded units, complete with sun visors.   These are interlocked to the loading bay, so the light shows green when the door is closed and red whenever the door is open.

AROD Insulated Sectional Overhead Door. The door tracks are our galvanised steel ‘J’ type, which are designed to give free and easy running for bearing rollers. These tracks are mounted onto a heavy-duty galvanised jamb angle. The perimeter of the doors is fully sealed, as well as the intermediate panel joints, providing most effective weather seal to the door. Electrically operated with a manual over ride.

Armo have been manufacturing high quality loading bay and lifting table solutions since 1972, for further technical or pricing information please contact us.